User's Manual

Table Of Contents

Ground Based Access P oint (GAP) Hardw are Installation Site Cleanup

Site Cleanup

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Tools and storage

Place all hand and power tools in the installation tool kit or other appropriate place. Note any

tools that need replacement, cleaning, or adjustment. K eep any tools unique to the

Motorola

equipment either at the site, or in an appropriate safe place for later use if needed, as speciﬁed

by the site manager .

T ools unique to the

Motorola

site equipment can include, but are not limited to:

• K eys

• Special

Motorola

– supplied tools, such as a single -purpose security socket wrench

• Other third -party installation tools unique to the installation of the site equipment

Materials storage

Place any leftover (usable) materials in a location speciﬁed by the site manager .

Debris cleanup

Remove any packing material. Ensure that all scrap materials have been removed. Clean/sweep

the ﬂoor . Ensure that all chalk line marks have been removed..Appropriately dispose of any

hazardous waste as speciﬁed by the site manager .

Environment

Organize any items (manuals, materials, etc.) left on site and place them in a location speciﬁed

by the site manager .

Other items unique to the

Motorola

site equipment can include, but are not limited to:

68P09286A73 -1 7 -3

PRELIMINARY - UNDER DEVELOPMENT JUL 2007