User's Manual

Introduction Chapter 7: What ’ s Next and Cleanup
Introduction
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
This section describes general information regarding the final steps of the installation.
These are:
• Clean up the site
• Fill out the installation completion checklist
• Optimize the system
Clean up the site
Clean up the site by following the information given in the Site Cleanup section in this chapter .
Installation checklist
A fter the site is cleaned up, fill out the installation completion checklist. This checklist is located
in the Installation Completion Checklist section of this chapter .
Optimize the system
Optimize the system by following the procedures given in the appropriate optimization and
other associated manuals (product specific, and product enabled, such as on -line help on the
LMT or EMS).
This hardware installation manual does not include card and module placement, applying power ,
tuning, network configuration, software site commissioning, troubleshooting, etcetera.
7 -2 68P09286A73 -1
PRELIMINARY - UNDER DEVELOPMENT JUL 2007