User's Manual

Mounting and bolt congur ations Chapter 4: Indoor GAP Hardw are Installation
Installation on concrete
Concrete mounting is used in an outdoor GAP configuration. The same mounting can be used
for an indoor rack mounting on a concrete floor .
Due to the weight of the GAP cabinet, the supporting structure (concrete slab) must
be able to withstand at least 1000 lbs (500 kg).
Refer to Figure 4 -1 for a typical cross - section of the concrete bolt mounting to the GAP cabinet
or rack mounting brackets.
Figure 4 -1 Concrete mounting
ti-cdma-05742-cnc.eps
CONCRETE
HILTI-BOLT
HSL-3M 8/20
LARGE FLAT
WASHER
MOUNTING
BRACKET
ISOLATION
PAD
(AFFIXED
TO
BRACKET)
OPTIONAL
ISOLATION
WASHER
PRELIMINARY ILLUSTRATION
Installation on wooden oor
W ooden floor mounting is typically used in an indoor GAP , rack mounting configuration.
4 -6 68P09286A73 -1
PRELIMINARY - UNDER DEVELOPMENT JUL 2007