User's Manual

Ground Based Access P oint (GAP) Hardw are Installation T ools and Materials
Tools and Materials
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Introduction
Many of the tools and materials depend on the GAP installation, being indoor or outdoor . The
indoor GAP is mounted in a standard 19 - inch rack. The outdoor GAP is installed on a concrete
slab. T ools and materials also depend on the style of the wall or pole on which the RF Head
mounting bracket is being installed. Due to different mounting styles, additional tools and
materials may be required to meet site specific needs.
Tools and Materials
The tools and materials listed in T able 1 -2 are generally recommended to properly and safely
perform the various installation procedures. Not all tools will be used in all procedures.
Table 1 -2 T ools and Materials
Hand T ool Materials Purpose
Adjustable T orque ratchet
and metric/standard socket
set
Customer Supplied F or general torquing of bolts and nuts.
Cordless P ower Drill, 3/8-in
or 1/2-in drive
Appropriate wood and
masonry drill bits (Standard
set may be adequate)
Customer Supplied
Drill holes in wood and light concrete
Bucklestrap Cutting T ool (Motorola P/N 6604809N01) F or the pole mounting brackets
T ape Measure
Customer Supplied General purpose measurement
Tin Snips
Customer Supplied General purpose metal cutting
Safety Glasses Customer Supplied Eye Safety
Knife or Box Cutter Customer Supplied General purpose cutting
13/16 Breakaway T orque
W rench 38-in. lb
Customer Supplied
N Connectors
Crane or industrial fork lift
(must be rated for at least two
ton capacity)
Customer Supplied Used to transport and support for GAP
cabinet(s)
Block and T ackle Customer Supplied High - capacity , 4 - point cable with hooks or
carabiners used for transport and support for
GAP cabinet(s)
No . 2 Blade Screw Driver Customer Supplied General purpose
Continued
68P09286A73 -1 1 -7
PRELIMINARY - UNDER DEVELOPMENT JUL 2007