User's Manual

Optional Band P ass Filters Chapter 5: Optional Equipment
Optional Band Pass Filters
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Overview
This chapter contains general information and procedures for installing optional equipment.
Band pass filters are available as optional equipment to accommodate customers with specific
band allocations.
Filter Requirements
W eight and Dimensions The band pass filter(s) used should meet the following
requirements:
• W eight: 1.6 kg (3.5 lbs)
• Dimensions: 50 mm (2 in) W x 150 mm (6 in) H x 100 mm (4 in) D .
Figure 5 -1 Band P ass Filter
Filter Mounting Figure 5 -2 shows the optimal mounting position on the RF Carrier Unit
(RFCU). The filters are mounted such that cable lengths are kept to a minimum.
Figure 5 -2 Filter Mounting
5 -2 68P09277A59 -5
Draft OCT 2006