User's Manual

RF GPS Cabling Installation Chapter 4: Access P oint Hardw are Installation

RF GPS Cabling Installation

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Objective

The objective of this procedure is to install the Local (RF) Global P ositioning System (RF GPS)

cabling.

Tools and Materials

provides the quantities and descriptions of the cables.

• 5/16 Breakaway T orque W rench 9 -in. lb

• Adjustable T orque R atchet with metric socket set

• Flathead screwdriver

• N -SMA Adapter

Cable Description

Cable K as listed in T able 3 -1 is required for installation.

Installing RF GPS Antenna and Cable

Figure 4 -15 shows the components of the RF GPS . The RF GPS is connected to the B CU via the

Customer Interface compartment.

Procedure 4 -7 Procedure for Installing RF GPS Antenna and Cabling

Determine the mounting location (see RF GPS Mounting Considerations,

T able 3-8 ).

Install the mounting kit at the RF GPS location of choice. Use the appropriate

mounting bolts for mounting surface.

Continued

4 -34 68P09277A59 -5

Draft OCT 2006