User's Manual

RF GPS Cable Chapter 3: Cable Descriptions
RF GPS Cable
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Objective
This section contains general information on the R adio Frequency Global P ositioning System
receiver (RF GPS) antenna cabling. More commonly referred to as Local GPS . Refer to for
installation information.
Cable Label
Refer to T able 3 -1 for the labels used to identify the cables that will be shown in illustrations
throughout this chapter .
Table 3 -7 Local GPS Cable Description and P art Numbers
Cable Qty
Part Number Description
D
1 Receiver SGRG4030
Assembly , GPS , RF Module
1 CGDSGPSKITF4NM50
Assembly , Receiver , RF GPS with 50
ft. cable
An SMA to N adapter is required; otherwise, a smaller diameter cable must be made with an
SMA connector on one end, with a maximum loss of <4.5 dB.
Surge Protection
RF GPS antenna requires lightning protection.
Mounting Considerations
Refer to T able 3 -8 for Local GPS mounting considerations.
3 -10 68P09277A59 -5
Draft OCT 2006