User's Manual

Access P oint Hardw are Installation Cable Descriptions
Cable Descriptions and Part Numbers
T able 3 -1 gives the cable descriptions and part numbers of the various cables that will connect
to the Base Control Unit (B CU) and RF head.
Table 3 -1 Cable Description and P art Numbers
Cable Qty
Part Number Description
A
2
Customer Supplied Ground cable, 6 A WG or larger , insulated copper
wire. Requires one two-hole lug connectors.
B
2–8 3089492T02
Antenna Cable, 300 mm (1 ft.)
C 1 T472AA
RGPS cable, 15 m (50 ft.)
T472AB
RGPS cable, 38 m (125 ft.)
T472AC
RGPS cable, 76 m (250 ft.)
T472AD
RGPS cable, 152 m (500 ft.)
T472AE
RGPS cable, 304 m (1000 ft.)
T472AF
RGPS cable, 608 m (2000 ft.)
C1 1 SGKN4386
Punch block to CBIO Board, 15 pin D -connector on
one end and loose wires on the other end. Cable is
Motorola P/N 3086433H12.
D
1 SGRG4030A
CGDSGPSKITF4NM50
Assembly , Receiver , GPS , RF Module
Antenna, GPS , with mounting and 50 ft.
cable.
E
2
Customer Supplied AC P ower Cable, 10 A WG , copper
F
1 SGLN6414A
Assembly , Installation, Installation HDW Pkg B CU
G 1–4 3089298C01 — 05
RF Head DC P ower Cable
H
1–4 3089843T01 —05
Fiber Optic Cable
J
6
Customer Supplied Ethernet cables, RJ-45 connectors, straight
K
1 SGRG4030A
CGDSGPSKITF 4NM50
Assembly , Receiver , GPS , RF Module
Antenna, GPS , with mounting and 50 ft.
cable.
68P09277A59 -5 3 -3
Draft OCT 2006