User's Manual

Access P oint Hardw are Installation Installation Ov erview
1. A ttach the B CU mounting bracket assembly to wall/pole or mount on pedestal
2. Install B CU .
3. A ttach the RF Head mounting bracket assembly to pole
4. Install RF Head
5. Install Antennas
6. Install RGPS or RF GPS antenna
7. Connect earth ground cables
T o B CU
T o RF Head
Between RF Head and tower
Between antennas and tower
T o GPS
8. Connect AC power cable
9. Connect DC power cables from RF Head to B CU
10. Connect antenna cables to B CU
11. Connect GPS cables to B CU
12. If present, connect Ethernet cables
13. Connect Fiber Optic cable from RF Head to B CU
14. If required, power on units
15. Clean up site
16. Fill out the installation completion checklist
Installation Kits
The following items are the kits that may have been shipped to the site.
• STHX4003 — 3.5 GHz RF Head
• STLN6518 — 3.5 GHz RF Head Mounting Bracket
• SC1666 — Base Control Unit (AC)
• SXXX — B CU P ole Mount Bracket
68P09277A59 -5 4 -3
Draft OCT 2006