User's Manual
Fixed Wireless Terminal Description – continued
Fixed Wireless Terminal Description and Installation
4/98
1-6
FWT connection panel
Power, telephone, and antenna connections are made to the FWT on the
rear panel. Figure 2 shows the rear panel and describes each feature.
Simultaneous operation of the programmer and data/fax ca-
pability is not supported at this time.
NOTE
Figure 2: FWT Rear Panel
RJ–11
SOCKET
BATTERY
TOGGLE
SWITCH
AUXILIARY MOLEX
12 VDC SOCKET
ANTENNA TNC
CONNECTOR
WALL CUBE
12 VDC SOCKET
RJ–45 FOR DIGITAL
DATA APPLICATIONS
Table 2: FWT Connection Panel
Item Purpose
RJ–11 Socket connects RJ–11 cable (max. per–cable length: 100 m) to telephone(s)
RJ–45 Socket connects computer for PC data
Battery Toggle Switch disables battery power
Auxiliary 12 VDC Socket connects auxiliary DC power source
Wall Cube 12 VDC Socket connects primary DC power source (wall cube)
Antenna TNC Connector connects antenna, or antenna cable (for externally mounted antenna)
1