Installation Instructions

R20 1X UBS Macro B T S Hardw are Installation Mid -capacit y Expansion Interconnect Cabling
Procedure 3 -14 Installing RX share cable (Continued)
The SGLN6345 cable contains two separate cables bundled
together . The SGLN6345 cable has four ends with a connector on
each end.
The ends of the RX share cable are labeled as follows:
• XMI 1 RX EXP OUT
• XMI 1 RX EXP IN
• XMI 2 RX EXP OUT
• XMI 2 RX EXP IN
2
Install the RX share cable as follows:
1. Connect the XMI 1 RX EXP OUT cable connector to the RX EXP OUT
connector on the XMI 1 front panel.
2. Connect the XMI 1 RX EXP IN cable connector to the RX EXP IN
connector on the XMI 1 front panel.
3. Connect the XMI 2 RX EXP OUT cable connector to the RX EXP OUT
connector on the XMI 2 front panel.
4. Connect the remaining XMI 2 RX EXP IN cable connector to the RX
EXP IN connector on the XMI 2 front panel.
68P09283A62 -2 3 -31
A UG 2007 PRELIMINARY