Installation Instructions

T ask 1: Installing RGPS Head Chapter 2: UBS Macro B T S Installation Procedure

Task 1: Installing RGPS Head

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Objective

The objective of this procedure is to install the optional Remote GPS (RGPS) head and cables

(NN and AA). The site conﬁguration/characteristics determines whether an RGPS head and

cables are to be installed.

Any of the following RGPS heads may be used:

• STLN6594 (Motorola part number)

• 0186012H04 (Motorola part number)

Cable NN works with any of the above listed RGPS heads.

RGPS head installation

Required items

The following tools are required:

• Adjustable torque ratchet with metric socket set

• Flat head screwdriver

• Lightning Arrestor (Motorola part number CGDSO971017AA1 or equivalent)

T able 2 -9 gives a list of the cables.

Table 2 -9 List of required cables for RGPS head installation

Cable Quantity

Part Number Description

1 SGKN4430

(3086433H14)

15 pin D -connector on one end and loose

wires on the other end. Cable is Motorola P/N

3086433H12.

3086039H10

RGPS cable, 15 m (50 ft); part of Option T472AG

3086039H11

RGPS cable, 38 m (125 ft); part of Option T472AH

3086039H12

RGPS cable, 76 m (250 ft); part of Option T472AJ

2 -20 68P09283A62 -2

PRELIMINARY A UG 2007