User's Manual

Download the BTS – continued

3-42 1X SC 4812T Lite BTS Optimization/ATP FEB 2005

PRELIMINARY

Download RAM Code and Data

to MGLI and GLI

Perform the procedure in Table 3-17 to download the RAM Code and

Data to the MGLI and other installed GLI Devices.

Prerequisites

S Prior to performing these procedures, ensure that a Code File exists

for each of the devices to be loaded.

S The LMF Computer is connected to the BTS.

– Refer to Table 3-6.

S The LMF Computer is logged in using the GUI Environment.

– Refer to Table 3-10.

Table 3-17: Download and Enable MGLI and GLI Devices Procedure

n Step Action

1 Ensure that the LMF will use the correct Software Release for Code and Data Downloads by

performing the following actions:

1a Click on Tools in the LMF Menu Bar, and select Update NextLoad > CDMA from the

Pull–down Menu.

1b Click on the BTS to be loaded.

– The BTS will be highlighted.

1c Click the button next to the correct Code Version for the Software Release being used.

– A black dot will appear in the Button Circle.

1d Click Save.

1e Click OK to close each of the advisory Boxes that appear.

2 Prepare to download code to the MGLI by clicking on the device.

3 Click Device in the BTS Menu Bar, and select Download > Code/Data in the Pull–down Menu.

– A Status Report is displayed confirming change in the device(s) status.

4 Click OK to close the Status Window.

– The MGLI will automatically be downloaded with data, and then enabled.

5 Once the MGLI is enabled, load and enable the additional installed GLI Cards by clicking on the

devices and repeating Step 3 and Step 4.

6 Click OK to close the Status Window for the additional GLI Devices.