User's Manual
Using the LMF – continued
FEB 2005 1X SC 4812T Lite BTS Optimization/ATP 3-23
PRELIMINARY
CDF/NECF Requirements
For the LMF to recognize the devices installed in the BTS, a BTS
CDF/NECF File that includes Equipage Information for all the devices
in the BTS must be located in the applicable <x>:\<lmf Home
Directory>\cdma\bts–# folder. To provide the necessary Channel
Assignment Data for BTS Operation, a CBSC CDF File that includes
Channel Data for all BTS RF Modem Frames is also required in the
folder..
RFDS Display
If an RFDS is included in the CDF/NECF File, an RFDS Tab labeled
with “RFDS,” a Dash, and the BTS Number–Frame Number
Combination (for example, RFDS–812–1) is displayed..
Graphical User Interface
Operation
Perform the procedure in Table 3-9 to operate the LMF GUI.
Table 3-9: LMF GUI Operating Procedure
n Step Action
1 Select the device or devices upon which an action is to be performed.
2 Select the action to apply to the selected device(s).
– While the action is in progress, a Status Report Window displays the action taking place and
other status information.
– When the action is complete, the Status Report Window states its completion and displays
other pertinent information.
3 Click the OK Button to close the Status Report Window.
3