User's Manual

Using the LMF – continued

FEB 2005 1X SC 4812T Lite BTS Optimization/ATP 3-35

PRELIMINARY

Table 3-14: Establishing MMI Communication Procedure

n ActionStep

2 If the LMF Computer has only one Serial Port (COM1) and the LMF is running, disconnect the

LMF from COM1 by performing the following actions.

2a Click on Tools in the LMF Window Menu Bar, and select Options from the Pull–down Menu.

– An LMF Options Dialog Box will appear.

2b In the LMF Options Dialog Box, click the Disconnect Port Button on the Serial Connection Tab.

3 Start the named HyperTerminal Connection for MMI Sessions by double clicking on its Windows

Desktop Shortcut.

NOTE

If a Windows Desktop Shortcut was not created for the MMI Connection, access the connection

from the Windows Start Menu by selecting:

Programs > Accessories > Hyperterminal > HyperTerminal > <Named HyperTerminal

Connection (e.g., MMI Session)>

4 Once the MMI Connection Window opens, establish MMI Communication with the BTS FRU by

pressing the LMF Computer <Enter>Key until the prompt identified in the applicable procedure

is obtained.

NULL MODEM

BOARD

(TRN9666A)

8–PIN TO 10–PIN

RS–232 CABLE

(P/N 30–09786R01)

RS–232 CABLE

8–PIN

LMF

COMPUTER

To FRU MMI Port

DB9–TO–DB25

ADAPTER

COM1

COM2

FW00687

Figure 3-9: LMF Computer Common MMI Connections

Online Help

Task oriented Online Help is available in the LMF by clicking Help in

the Window Menu Bar, and selecting LMF Help from the Pull–down

Menu.