User's Manual

Basic Troubleshooting: RF Path Fault Isolation – continued
6-16 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Flowchart Prerequisites
Before entering the Fault Isolation Sequence shown in the flowchart,
ensure that the following items have been completed:
S GLI Cards, MCC Cards, and BBX Cards have been downloaded with
the correct ROM Code, RAM Code, and data (Table 3-16, Table 3-17,
and Table 3-18).
S MGLI, CSM Cards, and MCC Cards are enabled (Table 3-17,
Table 3-20, and Table 3-21, respectively).
S Ensure that the LED on the correct CCD Card is solid green.
S Ensure no alarms are being reported by opening an LMF Alarm
Window as outlined in WinLMF On-Line Help SR2.16.x .
6