User's Manual

Verify and Upgrade ROMMON Version – continued
FEB 2005 1X SC 4812T Lite BTS Optimization/ATP I-73
PRELIMINARY
Additional Required Equipment/Software
For this method, the following equipment item and associated software
is required in addition to the common items required for both methods
.
:
S CF Memory Card Reader Device and Software Driver for the
Operating System installed on the LMF Computer.
Card Readers for other non–volatile, solid–state memory
devices such as Smart Media Cards will not work with the
CF Memory Cards used in the MWR 1941 Routers. Do not
attempt to use a Card Reader intended for another type of
memory device.
CAUTION
Prerequisites
The following items are required prior to performing this procedure.:
S The LMF Computer and BTS Router have been prepared for CF
Memory Card Reader File Transfer and are operating as they would be
after performing the procedures in Step 1 through Step 10 of Table I-8.
S A copy of the required ROMMON Version is loaded into the desired
directory of the LMF Computer.
File Operations using a CF Memory Card Reader
Only File Transfers should be performed using the CF Memory Card
Reader. CF Memory Card Formatting should be performed in a BTS
Router using a HyperTerminal Connection. Attempting to format a CF
Memory Card from a Windows–based computer using a Card Reader
could result in unpredictable BTS Router Operation..
Do not format BTS Router CF Memory Cards using a
Windows–based computer. Only format CF Memory Cards
in a BTS Router.
CAUTION
Verifying and replacing installed ROMMON Version
Perform the procedure in Table I-14 to verify and, if necessary replace
the installed ROMMON Version using a CF Memory Card Reader..
I