User's Manual

Verify and Upgrade ROMMON Version – continued
FEB 2005 1X SC 4812T Lite BTS Optimization/ATP I-69
PRELIMINARY
Table I-13: Verify and Replace the Installed ROMMON Version using a TFTP Server
n ActionStep
9 If the Default Filename displayed in the prompt is correct, press the Enter Key to accept it.
S If it is missing or not correct, enter the correct filename.
– A response similar to the following will be displayed:
Destination filename [startup–config]?
!
[OK – 2212/4096 bytes]
2212 bytes copied in 0.152 secs
BTSRTR1#
NOTE
The IOS defaults to the CF Memory Card (slot0:) Directory unless the present Working Directory
has been changed by using the cd Command.
– Identify the present Working Directory by entering pwd.
– If the present Working Directory has been changed, enter the command cd slot0: to return
to the default setting.
10 Determine the amount of memory available (bytes free) on the CF Memory Card by entering the
dir command.
– A response similar to the following will be displayed:
BTSRTR1#dir
Directory of slot0:/
1 –rw– 7051976 Sep 23 2002 07:24:18 mwr1941–i–mz.122–8.MC2b.bin
2 –rw– 2212 Mar 01 1993 00:14:48 canned–config
31932416 bytes total (24885606 bytes free)
Router#
11
Verify that there is at least 1 MB (1048580) of free memory.
NOTE
A ROMMON Version File requires approximately 0.7 MB.
12 Begin to copy the required version of the ROMMON File from the LMF Computer to the BTS
Router by entering the following command.
copy TFTP:new_rommon_filename slot0:
– Where new_rommon_filename = the filename of the required ROMMON Version for the
BTS Router.
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:MWR1941_RM2.srec.122–8r.MC3.bin slot0:
Address or name of remote host [100.100.100.1]?
table continued on next page
I