User's Manual

Replacing Installed BTS Router CF Memory Card IOS Version – continued
I-64 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Table I-12: Use CF Memory Card Reader to Place IOS File
First in CF Memory Card File Sequence
n ActionStep
28 Verify that the IOS File is now the first file displayed in the Directory Listing by entering the dir
Command.
– A response similar to the following will be displayed:
Router#dir
Directory of slot0:/
1 –rw– 7051976 Sep 23 2002 07:24:18 mwr1941–i–mz.122–8.MC2a.bin
2 –rw– 2212 Mar 01 1993 00:14:48 canned–config
31932416 bytes total (24885606 bytes free)
Router#
29 If this procedure was entered from Step 5 of Table I-9, return to Table I-9, Step 6.
30 If this procedure was entered from Step 20 of Table I-11, return to Table I-11, Step 21.
31 If no other BTS Router File Operations or Configuration Actions are required, perform the
following actions.
31a Remove power from the BTS Router and disconnect it from the Power Supply Module.
31b Disconnect all cabling from the BTS Router.
31c On the LMF Computer, exit the HyperTerminal Communications Session.
32
If a TFTP Server was used in this procedure and no additional TFTP Transfer activities are to be
performed, change the NIC IP Address and Subnet Mask back to those for LMF–BTS
Communication recorded in Table I-4, Step 9b.
! CAUTION
If the BTS 10base–2 LAN IP Address and Subnet Mask for the LMF Computer’s NIC are not
restored, the LMF can not log into a BTS when attempting to perform a BTS Optimization or
ATP.
I