User's Manual

Replacing Installed BTS Router CF Memory Card IOS Version – continued
I-62 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Table I-12: Use CF Memory Card Reader to Place IOS File
First in CF Memory Card File Sequence
n ActionStep
17 Copy the Canned Configuration File to the CF Memory Card by entering the following command.
copy TFTP:btsrtr_canned.color slot0:canned–config
– Where color = blue or red, as applicable.
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:btsrtr_canned.blue slot0:canned–config
Address or name of remote host [100.100.100.1]?
18 If the Default IP Address for the LMF Computer displayed in the prompt is correct, press the
Enter Key to accept it.
S If it is missing or not correct, enter the correct IP Address.
– A response similar to the following will be displayed if the Default Filename is accepted:
Destination filename [canned–config]?
2212 bytes copied in 0.208 secs
Router#
19 At the prompt for the Destination Filename, press the Enter Key.
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:btsrtr_canned.blue slot0:canned–config
Address or name of remote host []? 100.100.100.1
Destination filename [canned–config]?
Loading btsrtr_canned.blue from 100.100.100.1 (via Ethernet0/0): !
[OK – 2457/4096 bytes]
2457 bytes copied in 84.724 secs (29 bytes/sec)
BTSRTR1#
20 Determine if the IOS File is now the first file displayed in the Directory Listing by entering the
dir Command.
– A response similar to the following will be displayed:
Router#dir
Directory of slot0:/
1 –rw– 7051976 Mar 01 1993 00:14:48 mwr1941–i–mz.122–8.MC2a.bin
2 –rw– 2212 Sep 23 2002 07:24:18 canned–config
31932416 bytes total (24878228 bytes free)
Router#
21 Identify if the IOS File is the first file displayed, as shown in Step 20, above.
S If it is the the first file displayed, proceed to Step 29.
S If it is not the the first file displayed, proceed to Step 22.
table continued on next page
I