User's Manual

Table Of Contents

Replacing Installed BTS Router CF Memory Card IOS Version – continued

I-48 1X SC 4812T Lite BTS Optimization/ATP FEB 2005

PRELIMINARY

Table I-10: Using a TFTP Server Application for Replacing Loaded

IOS Version and Verifying File Sequence Position

n ActionStep

18 If the Default Filename displayed in the prompt is correct, press the Enter Key to accept it.

S If it is missing or not correct, enter the correct filename.

– A response similar to the following will be displayed if the Default Filename is selected:

Source filename [mwr1941–i–mz.122–8.MC2a.bin]?

Destination filename [mwr1941–i–mz.122–8.MC2a.bin]?

19 If the Default Filename displayed in the prompt is correct, press the Enter Key to accept it.

S If it is not correct, enter the correct filename.

– A response similar to the following will be displayed if the Default Filename is selected:

Destination filename [mwr1941–i–mz.122–8.MC2a.bin]?

Accessing TFTP://100.100.100.1/mwr1941–i–mz.122–8.MC2a.bin...

Loading mwr1941–i–mz.122–8.MC2a.bin from 100.100.100.1 (via FastEthernet0/0): !!!!

Loading mwr1941–i–mz.122–8.MC2a.bin from 100.100.100.1 (via FastEthernet0/0):

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK – 7051976/14103552 bytes]

7051976 bytes copied in 145.108 secs (48634 bytes/sec)

BTSRTR1#

20 Display the CF Memory Card Directory to verify that the new IOS File is there by entering the dir

command.

– A response similar to the following will be displayed:

BTSRTR1#dir

Directory of slot0:/

1 –rw– 7051976 Sep 23 2002 07:25:36 mwr1941–i–mz.122–8.MC2a.bin

31932416 bytes total (24880440 bytes free)

BTSRTR1#

table continued on next page