User's Manual

Table Of Contents

Replacing Installed BTS Router CF Memory Card IOS Version – continued

FEB 2005 1X SC 4812T Lite BTS Optimization/ATP I-45

PRELIMINARY

Table I-10: Using a TFTP Server Application for Replacing Loaded

IOS Version and Verifying File Sequence Position

n ActionStep

5 At the Remote Host Prompt, enter the following:

100.100.100.1

– A response similar to the following will be displayed:

Address or name of remote host []? 100.100.100.1

Destination filename [mwr1941–i–mz.07022002.bin]?

6 If the Default Filename displayed in the prompt is correct, press the Enter Key to accept it.

S If it is missing or not correct, enter the correct filename.

– A response similar to the following will be displayed if the Default Filename is selected:

Address or name of remote host []? 100.100.100.1

Destination filename [mwr1941–i–mz.07022002.bin]?

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

7051844 bytes copied in 109.92 secs (64697 bytes/sec)

BTSRTR1#

7 If additional files are stored on the CF Memory Card, begin backing them up to the LMF

Computer’s Default TFTP Directory by entering the following command.

copy additional_filename TFTP:

– Where additional_filename = the filename of an additional file loaded on the BTS Router

CF Memory Card.

– A response similar to the following will be displayed:

BTSRTR1#copy canned–config TFTP:

Address or name of remote host [100.100.100.1]?

8 If the Default IP Address displayed in the prompt is correct, press the Enter Key to accept it.

S If it is missing or not correct, enter the correct IP Address for the LMF Computer.

– A response similar to the following will be displayed if the Default Filename is selected:

Address or name of remote host [100.100.100.1]?

Source filename [canned–config]?

table continued on next page