User's Manual

Verifying IOS Canned Version of the CF Memory Card – continued
I-30 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Table I-7: Transfer Canned Configuration Files to the BTS Router Using a TFTP Server
n ActionStep
13 At the Privileged EXEC Mode Prompt, enter the following command.
copy TFTP:btsrtr_canned.color slot0:canned–config
– Where color = blue or red, as applicable.
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:btsrtr_canned.blue slot0:canned–config
Address or name of remote host []?
14 At the prompt for the Remote Host Address or Name, enter the IP Address of the LMF Computer
NIC:
100.100.100.1
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:btsrtr_canned.blue slot0:canned–config
Address or name of remote host []? 100.100.100.1
Destination filename [canned–config]?
15 At the prompt for the Destination Filename, press the Enter Key.
– A response similar to the following will be displayed:
BTSRTR1#copy TFTP:btsrtr_canned.blue slot0:canned–config
Address or name of remote host []? 100.100.100.1
Destination filename [canned–config]?
Loading btsrtr_canned.blue from 100.100.100.1 (via Ethernet0/0): !
[OK – 2457/4096 bytes]
2457 bytes copied in 84.724 secs (29 bytes/sec)
BTSRTR1#
16 Verify that the Canned Configuration File is saved on the CF Memory Card by entering the dir
Command.
– A response similar to the following will be displayed:
Directory of slot0:/
1 –rw– 7051976 Mar 01 1993 00:11:34 mwr1941–i–mz.122–8.MC2a.bin
2 –rw– 2457 Mar 01 1993 00:14:48 canned–config
31932416 bytes total (24877983 bytes free)
BTSRTR1#
17 To allow the BTS Router to boot using the Canned Configuration, enter the following command.
copy canned–config start
up–config
– A response similar to the following will be displayed:
BTSRTR1#copy canned–config start
Destination filename [startup–config]?
table continued on next page
I