User's Manual

Verifying IOS Canned Version of the CF Memory Card – continued
I-26 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
MWR 1941 Routers must be loaded with IOS Version
mwr1900–i–mz.122–8.MC2d.bin or later. This Router
model will not function properly with earlier IOS Versions.
IMPORTANT
*
This procedure does not cover all aspects of BTS Router
Operation and programming.
Before performing this procedure, review BTS Router
initialization, operation, and programming information
and procedures in MWR1941 Wireless Mobile Edge
Router Software Configuration Guide; part number
78–13983–01.
Have this publication available for reference while
performing this procedure.
NOTE
Table I-7: Transfer Canned Configuration Files to the BTS Router Using a TFTP Server
n Step Action
! CAUTION
If Personal Firewall and/or Intrusion Detection Software such as Black ICE is running on the LMF
Computer, shut it down before performing this procedure.
– If this is not done, the TFTP Transfer Process will not operate.
1 On the LMF Computer, if it has not been done, start the TFTP Server according to the
manufacturer’s directions.
– Refer to the Setting Up the TFTP Server – Procedure in the Cellular System Administration –
CDMA OnLine Documentation.
* IMPORTANT
MWR 1941 Routers must be loaded with IOS Version mwr1900–i–mz.122–8.MC2d.bin or later.
– This Router model will not function properly with earlier IOS Versions.
2 If a HyperTerminal Communication Session with the BTS Router is not running, start one by
performing the procedure in Table I-2.
3 In the HyperTerminal Window, the BTS Router must be in the Privileged EXEC Mode, as
indicated by a number sign at the end of the prompt:
BTSRTR1#
4 Ensure that the Ethernet Crossover Cable is connected between the LMF Computer NIC Port and
the BTS Router FE 0 Port.
– Refer to Figure I-4.
table continued on next page
I