User's Manual

Verifying IOS Canned Version of the CF Memory Card – continued
I-18 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Preparation for Canned Configuration File TFTP Transfer to
CF Memory Card
Preparation for a Canned Configuration File TFTP Transfer consists of
the following activities:
1. Setting the LMF Computer NIC IP Address
2. Creating a directory (folder) on the LMF Computer to be used for all
TFTP File Transfers
3. Installing the TFTP Server Application on the LMF Computer, and
setting the TFTP Server Application Root Directory to the directory
created in 2, above
4. Connecting the LMF Computer to the BTS Router for both
HyperTerminal (serial) and Ethernet Communication
5. BTS Router Power–up and Initial Configuration for Ethernet
Communication
The following procedures are used to accomplish all of these preparatory
actions.
Set LMF Computer NIC TCP/IP Address and Create the
Default TFTP Directory
Perform the procedure in Table I-4 to set the NIC IP Address..
If the IP Address for the LAN Connection on an LMF
Computer is being changed to support TFTP Downloads to
a BTS Router, the BTS 10base–2 LAN IP Address and
Subnet Mask for the NIC must be restored before the LMF
can log into a BTS to perform an Optimization or ATP.
IMPORTANT
*
There are differences between Windows 2000 and Windows
98 in the menus and screens used for setting or changing a
NIC Connection. In the following procedure, items
applicable to:Windows 2000 will be identified with
Win2000Windows 98 will be identified with Win98
NOTE
Table I-4: Set LMF Computer NIC IP Address and Create a Default TFTP Directory
n Step Action
1 Start the computer.
2 Login and allow the computer to boot to the Desktop.
table continued on next page
I