User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Preparatory Tasks
- Chapter 3: Optimization/Calibration
- Introduction to Optimization and Calibration
- Preparing the LMF
- Overview of Packet BTS Files
- LMF Features and Installation Requirements
- LMF File Structure Overview
- LMF Home Directory
- NECF Filename Conventions and Directory Location
- LMF Installation and Update Procedures
- Copy BTS and CBSC CDF (or NECF) Files to the LMF Computer
- Creating a Named HyperTerminal Connection for MMI Communication
- Span Lines - Interface and Isolation
- LMF to BTS Connection
- Switching the Active LAN - LMF I/O Panel 10Base-2 LAN Connection
Preparing the LMF – continued
FEB 2005 1X SC 4812T Lite BTS Optimization/ATP 3-7
PRELIMINARY
LMF Features and Installation
Requirements
Before Optimization can be performed, the LMF Application Software
must be installed and configured on a computer platform meeting
Motorola–specified requirements. Refer to Required Test Equipment and
Software in Chapter 1.
In order for the LMF Graphics to display properly, the
computer platform must be configured to display more
than 256 colors. See the Operating System Software
Instructions for verifying and configuring the Display
Settings.
NOTE
Software Files for installing and updating the LMF are provided on
CD–ROM Disks. The following items must be available:
S LMF Application Program on CD–ROM
S CDF/NECF for each supported BTS (on diskette or available from the
CBSC)
S CBSC File for each supported BTS (on Floppy Disk or CD–ROM)
FTP Server
To be able to download files to the GLI3, the LMF now runs FTP Server
Software on the LMF Laptop. The LMF FTP Server runs from the
LMF”s Home Directory. All the files necessary to run the LMF FTP
Server are installed from the LMF CD–ROM. The FTP Server is
automatically started by the LMF upon successful Login to a Packet
BTS.
In addition, the LMF provides a new option in the Tools Menu called
FTP Server. The option starts the LMFs FTP Server if Start is selected,
and stops the server if Stop is selected. The LMFs FTP Server runs on
Port 21.
If any other process is using that port, an Error Message is displayed to
the user stating that the port is occupied. There is another option under
the FTP Server Menu called FTP Monitor, that allows the user to watch
FTP Activity between the LMF and GLI.
Firewalls
Firewalls will block the FTP Requests from the Packet GLI to the LMF
Laptop. You must disable your firewall before attempting the BTS
Synch Command. Some common firewall programs to look for include
Network ICE, BlackICE, Norton’s Desktop Firewall, Enterprise
Firewall, and Personal Firewall.
3