User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Preparatory Tasks
- Chapter 3: Optimization/Calibration
- Introduction to Optimization and Calibration
- Preparing the LMF
- Overview of Packet BTS Files
- LMF Features and Installation Requirements
- LMF File Structure Overview
- LMF Home Directory
- NECF Filename Conventions and Directory Location
- LMF Installation and Update Procedures
- Copy BTS and CBSC CDF (or NECF) Files to the LMF Computer
- Creating a Named HyperTerminal Connection for MMI Communication
- Span Lines - Interface and Isolation
- LMF to BTS Connection
- Switching the Active LAN - LMF I/O Panel 10Base-2 LAN Connection
BTS Equipment Identification – continued
FEB 2005 1X SC 4812T Lite BTS Optimization/ATP 1-27
PRELIMINARY
SCCP Cage Configuration and
1X Devices
SC 4812T Lite BTS Frames have one SCCP Cage that will support up to
four MCC Cards and six BBX Cards.
MCC Cards
The BTS is configured with MCC–1X Cards and with Software Release
R2.16.5.x and supports CDMA2000 1X. For additional Software Release
Compatibility and Compatibility Information, contact the local Motorola
Account Team.
BBX Cards
Up to six BBX–1X Cards can be supported. SCCP Cage Card Slots 1
through 6 are carrier–dependant and sector–dependent. The SCCP Cage
R1 Card Slot is dedicated to the Redundant BBX. Refer to Table 1-5 for
BBX Card Slot Carrier and Sector Correlations.
1