User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Preparatory Tasks
- Chapter 3: Optimization/Calibration
- Introduction to Optimization and Calibration
- Preparing the LMF
- Overview of Packet BTS Files
- LMF Features and Installation Requirements
- LMF File Structure Overview
- LMF Home Directory
- NECF Filename Conventions and Directory Location
- LMF Installation and Update Procedures
- Copy BTS and CBSC CDF (or NECF) Files to the LMF Computer
- Creating a Named HyperTerminal Connection for MMI Communication
- Span Lines - Interface and Isolation
- LMF to BTS Connection
- Switching the Active LAN - LMF I/O Panel 10Base-2 LAN Connection
Terms and Abbreviations – continued
1-14 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Table 1-2: Non–Standard Terms and Abbreviations
Term or
Abbreviation
Definition
EMPC Expansion Multi–coupler Preselector Card.
BTS Expansion Frame MPC Card that is used to receive, amplify, and distribute RX
Signals from the Starter Frame MPC.
GLI3 Group Line Interface Card, third generation
Supports Packet Backhaul.
HSO High Stability Oscillator.
Module providing Back–up Timing Source for a BTS when the Timing Signal from the
GPS or Remote GPS Unit is unavailable.
HSO2 HSO Card, second generation
HSOX HSO Expansion.
Card used in a BTS Expansion Frame to interface with the Starter Frame HSO and
distribute the Timing Signals to the Expansion Frame CSM Cards.
ISC In–Service Calibration.
Technique for performing Calibration sector by sector on a BTS to avoid completely
removing the site from service.
LPAC Linear Power Amplifier Controller
MAP Meter Alarm Panel.
1X SC4812T Lite BTS FRU manual (68P09262A60) that contains the functions of both
the Temperature Compensation Panel (TCP) and the DMAC.
– Term is used interchangeably with DMAC.
MCC–1X Multi–channel CDMA Card supporting 16 or 48 CDMA2000 1X or (with Software
Release 2.16.0.84.3 and higher) IS–95A/B Channels.
MPC Multi–coupler Preselector Card.
BTS SCCP Cage Card used to amplify and distribute RX Signals to BBX Cards.
NECB Network Element Configuration Baseline
NECF Network Element Configuration File
NECJ Network Element Configuration Journal
OLF Object List File.
File containing a list of the ROM and RAM Code Versions that should be operating on
every device installed in a BTS.
The file is resident on the Central Base Station Controller (CBSC) Mobility Manager
(MM) and is passed to the GLI after a DLM Job is invoked.
The GLI uses the OLF to determine which devices require Code Download to meet the
OLF–specified Version.
table continued on next page
1