User's Manual
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Preparatory Tasks
- Chapter 3: Optimization/Calibration
- Introduction to Optimization and Calibration
- Preparing the LMF
- Overview of Packet BTS Files
- LMF Features and Installation Requirements
- LMF File Structure Overview
- LMF Home Directory
- NECF Filename Conventions and Directory Location
- LMF Installation and Update Procedures
- Copy BTS and CBSC CDF (or NECF) Files to the LMF Computer
- Creating a Named HyperTerminal Connection for MMI Communication
- Span Lines - Interface and Isolation
- LMF to BTS Connection
- Switching the Active LAN - LMF I/O Panel 10Base-2 LAN Connection
Required Test Equipment and Software – continued
1-8 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
5
3
2
7
1
4
6
GND
RX
TX
RTS
RSD/DCD
DTR
DSR
GND
TX
RX
RTS
RSD/DCD
DTR
DSR
ON BOTH
CONNECTORS:
SHORT PINS 7, 1, 4, 6
9–PIN D–FEMALE 9–PIN D–FEMALE
5
2
3
7
1
4
6
Figure 1-1: Null Modem Cable Detail
Model SLN2006A MMI Interface Kit
S Motorola Model TRN9666A Null Modem Board. Connectors on
opposite sides of the board must be used as this performs a Null
Modem Transformation between cables. This board can be used for
25–pin to 8–pin, 25–pin to 25–pin, and 10–pin to 10–pin conversions.
S Motorola 30–09786R01 MMI Cable or equivalent; used to interface
the LMF Computer Serial Port Connection to the Group Line Interface
(GLI), Clock Synchronization Manager (CSM), External Trunked
Interface Board (ETIB), and Module Debug Serial Ports.
Communications System
Analyzer CDMA/Analog
Table 1-1: CDMA LMF Test Equipment Support Table
Item Description Test Capability
Test Sets
Hewlett Packard, Model
HP 8921A (with 83203B)
Communications Analyzer (includes 83203B
CDMA Interface Option)
IS–95A/B only
Motorola CyberTest Communications Analyzer IS–95A/B only
Advantest R3465 (with 3561L) Communications Analyzer (with 3561 CDMA
option)
IS–95A/B only
Agilent E4406A (with E4432B) Communications Analyzer (with Generator) IS–95A/B and
CDMA 2000 Testing
Advantest R3267 Analyzer (with
R3562)
Communications Analyzer with Advantest
R3562 Generator
IS–95A/B and
CDMA 2000 Testing
Agilent 8935 Series E6380A
(formerly HP 8935) with Option
200 or R2K
Communications Test Set IS–95A/B and
CDMA 2000 Testing
Agilent E7495A Communications Test Set IS–95A/B and
CDMA 2000 Testing
Power Meters
Gigatronix 8541C Power Meter
HP437B (with HP8481A Sensor) Power Meter with Sensor – capable of measuring –30dBm to 20dBm
1