User's Manual

List of Tables – continued
x 1X SC 4812T Lite BTS Optimization/ATP FEB 2005
PRELIMINARY
Table 3-17: Download and Enable MGLI and GLI Devices Procedure 3-42 . . . . . . .
Table 3-18: Download RAM Code and Data to Non–GLI Devices Procedure 3-43 .
Table 3-19: Select CSM Clock Source Procedure 3-45 . . . . . . . . . . . . . . . . . . . . . . .
Table 3-20: Enable CSM Cards Procedure 3-45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-21: Enable MCC Cards Procedure 3-46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-22: CSM Card PWR/ALM LED States 3-48 . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-23: Test Equipment Set–up (GPS and HSO Verification) Procedure 3-51 . .
Table 3-24: GPS Initialization/Verification Procedure 3-53 . . . . . . . . . . . . . . . . . . . .
Table 3-25: IS–95A/B–only Test Equipment Interconnection 3-60 . . . . . . . . . . . . . .
Table 3-26: CDMA2000 1X/IS–95A/B Test Equipment Interconnection 3-61 . . . . .
Table 3-27: IS–95A/B–only Test Equipment Interconnection 3-80 . . . . . . . . . . . . . .
Table 3-28: CDMA2000 1X/IS–95A/B Test Equipment Interconnection 3-81 . . . . .
Table 3-29: Selecting Test Equipment Manually in the
Serial Connection Tab Procedure 3-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-30: Selecting Test Equipment Using Auto-Detect Procedure 3-102 . . . . . . . .
Table 3-31: LMF Test Equipment Calibration Procedure 3-103 . . . . . . . . . . . . . . . . .
Table 3-32: Test Cabling Calibration using Communications System
Analyzer Procedure 3-105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-33: TX/Duplexed RX Test Cabling using Signal Generator and
Spectrum Analyzer Calibration Procedure 3-107 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-34: Non–Duplexed RX Test Cabling Using Signal Generator and
Spectrum Analyzer Calibration Procedure 3-108 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-35: Setting Cable Loss Values Procedure 3-110 . . . . . . . . . . . . . . . . . . . . . . .
Table 3-36: Setting TX Coupler Loss Values Procedure 3-111 . . . . . . . . . . . . . . . . . .
Table 3-37: BLO bts–#.cal File Array Branch Assignments 3-115 . . . . . . . . . . . . . . .
Table 3-38: SC4812T Lite bts–#.cal File Array (by BBX/Sector) 3-115 . . . . . . . . . . .
Table 3-39: Set–up Test Equipment for RF Path Calibration Procedure 3-117 . . . . . .
Table 3-40: Test Patterns with Channels and Gain Settings Used 3-121 . . . . . . . . . . .
Table 3-41: All Cal/Audit and TX Calibration Procedure 3-123 . . . . . . . . . . . . . . . . .
Table 3-42: Download BLO Data Procedure 3-125 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-43: BTS TX Path Audit Procedure 3-126 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-44: Create CAL File Procedure 3-128 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-45: RFDS Parameter Settings Procedure 3-130 . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-46: Definitions of NAM Parameters 3-133 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-47: Valid NAM Field Ranges 3-134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-48: Set Antenna Map Data Procedure 3-135 . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 3-49: Set RFDS Configuration Data Procedure 3-136 . . . . . . . . . . . . . . . . . . . .
Table 3-50: RFDS TSIC Calibration Channel Frequencies 3-137 . . . . . . . . . . . . . . . .