User's Manual

Preparing the LMF – continued

PRELIMINARY

1X SCt4812ET Lite BTS Optimization/ATP

08/01/2001

3-6

Table 3-2: Copying CBSC CDF Files to the LMF Computer

Step Action

4 Type mount and press the Enter key.

NOTE

S Look for the “floppy/no_name” message on the last line displayed.

S If the eject command was previously entered, floppy/no_name will be appended with a number.

Use the explicit floppy/no_name reference displayed when performing step 7.

5 Change to the directory, where the files to be copied reside, by typing cd <directoryname>

(e.g., cd bts–248) and pressing the Enter key.

6 Type ls and press the Enter key to display the list of files in the directory.

7 With Solaris versions of Unix, create DOS–formatted versions of the bts–#.cdf and cbsc–#.cdf files on

the diskette by entering the following command:

unix2dos <source filename> /floppy/no_name/<target filename>

(e.g., unix2dos bts–248.cdf /floppy/no_name/bts–248.cdf).

NOTE

S Other versions of Unix do not support the unix2dos and dos2unix commands. In these cases, use

the Unix cp (copy) command. The copied files will be difficult to read with a DOS or Windows text

editor because Unix files do not contain line feed characters. Editing copied CDF files on the

CDMA LMF computer is, therefore, not recommended.

S Using cp, multiple files can be copied in one operation by separating each filename to be copied

with a space and ensuring the destination directory (floppy/no_name) is listed at the end of the

command string following a space (e.g., cp bts–248.cdf cbsc–6.cdf /floppy/no_name).

8 Repeat steps 5 through 7 for each bts–# which must be supported by the CDMA LMF computer.

9 When all required files have been copied to the diskette type eject and press the Enter key.

10 Remove the diskette from the CBSC drive.

11 If it is not running, start the Windows operating system on the CDMA LMF computer.

12 Insert the diskette containing the bts–#.cdf and cbsc–#.cdf files into the CDMA LMF computer.

13 Using MS Windows Explorer, create a corresponding bts–# folder in the wlmf\cdma directory for each

bts–#.cdf/cbsc–#.cdf file pair copied from the CBSC.

14 Use MS Windows Explorer to transfer the cbsc–#.cdf and bts–#.cdf files from the diskette to the

corresponding wlmf\cdma\bts–# folders created in step 13.