User's Manual

Troubleshooting: Receive ATP

08/01/2001

6-17

1X SCt4812ET Lite BTS Optimization/ATP

PRELIMINARY

Multi–FER Test Failure

Table 6-16: Troubleshooting Multi-FER Failure

n Step Action

1 Verify test equipment set up is correct for a FER test.

2 Verify test equipment is locked to 19.6608 and even second clocks. The yellow

LED (REF UNLOCK) must be OFF.

3 Verify MCCs have been loaded with data and are INS–ACT.

4 Disable and re-enable the MCC (1 or more based on extent of failure).

5 Disable, re-load code and data, and re-enable MCC (one or more MCCs based on

extent of failure).

6 Verify antenna connections to frame are correct based on the directions messages.