User's Manual

Generating an ATP Report
PRELIMINARY
1X SCt4812ET Lite BTS Optimization/ATP
08/01/2001
4-20
Background
Each time an ATP test is run, an ATP report is updated and must be
saved using the Save Results button to close the status report window.
The ATP report will not be updated if the status reports window is closed
using the Dismiss button.
ATP Report
A separate report is created for each BTS and includes the following for
each test:
S Test name
S PASS or FAIL
S Description information (if applicable)
S BBX number
S Channel number
S Carrier number
S Sector number
S Upper test limit
S Lower test limit
S Test result
S Time stamp
S Details/Warning information (if applicable)
Follow the procedures in the Table 4-10 to view and create a printable
file for the ATP report.
Table 4-10: Generating an ATP Report
Step Action
1 Click on the Login tab (if not in the forefront).
2 Select the desired BTS from the available Base Station pick list.
3 Click on the Report button.
4 Click on a column heading to start the report.
5 If not desiring a printable file copy, click on the Dismiss button.
6 If requiring a printable file copy, select the desired file, type in the pick list and click on the Save
button.
4