User's Manual

RFDS Setup and Calibration – continued
08/01/2001
3-81
1X SCt4812ET Lite BTS Optimization/ATP
PRELIMINARY
Set RFDS Configuration Data
If an RFDS is installed the RFDS configuration data must be manually
entered.
Prerequisite
S Logged into the BTS
The entered antenna# index numbers must correspond to
the antenna# index numbers used in the antenna maps.
IMPORTANT
*
Table 3-43: Set RFDS Configuration Data
Step Action
1 Click on the Util menu.
2 Select Edit > RFDS Configuration > TX or RX. A data entry pop–up window will appear.
3 Click on the Add Row button to add a new antenna number. Then click in the other columns and enter
the desired data.
4 To edit existing values click in the data box to be changed and change the value.
NOTE
Refer to the Util > Edit–RFDS Configuration LMF help screen for RFDS configuration data
examples.
5 To delete a row, click on the row and then click on the Delete Row button.
6 Click on the Save button to save displayed values.
7
Click on the Dismiss button to exit the window. Values that were entered/changed after the Save
button was used will not be saved.
NOTE
Entered values will be used by the LMF as soon as they are saved. You do not have to logout and
login.
3