User Manual

Download Files to the LMF - Site Specific BTS Files68P09255A57-2
Aug 2002
SC4812ET Optimization/ATP Manual Software Release R16.1.x.x
PRELIMINARY
3-27
Table 3-13: Update Antenna Mapping Files
Step Action
! CAUTION
If you are not familiar with the UNIX vi editor, create a “dummy” CDF file, and practice making
changes to it, prior to altering the “real” one.
NOTE
For more information on file management, creating bts directories, viewing/editing CDF files, refer to
the LMF Users Guide.
1 View the antenna.map file (see below) and verify the Xcvrs listed in the CDF file (and that are
equipped in the BTS) are also listed in the antenna.map file (for both RX and TX tables). Make
sure the antenna.map file has enough RX and TX antennas listed to cover the number of sectors
indicated by CDF’s SiteConf parameter.
Example of Antenna Map File
R --- Rx --- -- Sec -- ----- Xcvrs -----
R 1:M :RX1: 1 :1,4,5,8
R 2:D :RX2: 1 :1,4,5,8
R 3:M :RX3: 2 :2,4,6,8
R 4:D :RX4: 2 :2,4,6,8
R 5:M :RX5: 3 :3,4,7,8
R 6:D :RX6: 3 :3,4,7,8
T --- Tx --- -- Sec -- ----- Xcvrs -----
T 1:0 :TX1: 1 :1,4
T 2:0 :TX2: 2 :2,4
T 3:0 :TX3: 3 :3,4
T 4:0 :TX4: 1 :5,8
T 5:0 :TX5: 2 :6,8
T 6:0 :TX6: 3 :7,8
2 Verify all RX and TX antennas listed in the file antenna.map are also listed in the antenna.asu
file.
NOTE
The antenna.asu file is required only if the BTS is equipped with RFDS. Be sure that the information
in antenna files matches your actual configuration.
3