User Manual

GPIB68P09255A57-2

Aug 2002

SC4812ET Optimization/ATP Manual Software Release R16.1.x.x

PRELIMINARY

I-13

Table I-9: Verify and Change Agilent E4432B GPIB Address

Step Action

- On the front panel Numeric keypad, enter the signal generator GPIB address of 1.

-- The GPIB Address label will change to Enter.

-- Digits entered with the keypad will replace the current GPIB address in the Active Entry

display.

NOTE

To correct an entry, press the backspace key at the lower right of the keypad to delete one character at

a time.

3c - Press the Enter softkey button to set the new GPIB address.

-- The new GPIB address will be displayed under the GPIB Address softkey label.

Figure I-10: Setting Agilent E4432B GPIB Address

Numeric

Keypad

Softkey

Buttons

Softkey Label

Display Area

Active Entry

Area

Backspace

Key

Utility

Key