User Manual
GPIB68P09255A57-2
Aug 2002
SC4812ET Optimization/ATP Manual Software Release R16.1.x.x
PRELIMINARY
I-5
Table I-4: Verify and/or Change HP8935 GPIB Address
Step Action
2 If the current GPIB address is not set to 18, perform the following to change it:
- Press Shift and Inst Config.
- Turn the Cursor Control knob to move the cursor to the HP-IB Adrs field.
- Press the Cursor Control knob to select the field.
- Turn the Cursor Control knob as required to change the address to 18.
- Press the Cursor Control knob to set the address.
3
Press Preset to return to normal operation.
Figure I-3: HP8935 Test Set
FW00885
Preset
Cursor Control
Shift
Inst Config
Local
I