User Manual

GPIB
68P09255A57-2
Aug 2002
SC4812ET Optimization/ATP Manual Software Release R16.1.x.x
PRELIMINARY
I-4
Motorola CyberTest GPIB Address
Follow the steps in Table I-3 to verify and, if necessary, change the
GPIB address on the Motorola CyberTest. Changing the GPIB address
requires the following items:
 Motorola CyberTest communications analyzer
 Computer running Windows 3.1/Windows 95
 Motorola CyberTAME software program “TAME”
 Parallel printer port cable (shipped with CyberTest)
NOTE
This procedure assumes that the test equipment is set up and
ready for testing.
Table I-3: Verify and/or Change Motorola CyberTest GPIB Address
Step Action
1 On the LMF desktop, locate the CyberTAME icon. Double click on the icon to run the CyberTAME
application.
2 In the CyberTAME window taskbar, under Special, select IEEE.488.2.
3 CyberTAME software will query the CyberTest Analyzer for its current GPIB address. It then will
open the IEEE 488.2 dialog box. If the current GPIB address is not 18, perform the following
procedure to change it:
- Use the up or down increment arrows, or double-click in the field and type the number.
- Click on the OK button.
The new address will be written to the CyberTest via the parallel port and saved.
NOTE
Verify that the address has been set by repeating steps 2 and 3. The new address should now appear in
the IEEE 488.2 dialog box Address field.
HP8935 Test Set GPIB Address
Follow the procedure in Table I-4 to verify and, if necessary, change the
HP8935 GPIB address.
NOTE
This procedure assumes that the test equipment is set up and
ready for testing.
Table I-4: Verify and/or Change HP8935 GPIB Address
Step Action
* IMPORTANT
The HP I/O configuration MUST be set to Talk & Listen, or NO device on the GPIB bus will be
accessible. (Consult test equipment OEM documentation for additional information as required.)
1 To verify that the GPIB addresses are set correctly, press Shift and LOCAL on the HP8935 (see
Figure I-3). The current HP-IB address is displayed at the top of the screen.
NOTE
HP-IB is the same as GPIB.
I