User Manual

Intra-Cabinet Cabling68P09255A57-2
Aug 2002
SC4812ET Optimization/ATP Manual Software Release R16.1.x.x
PRELIMINARY
H-13
ETIB Cables and Cable Connectors
The ETIB module (see Figure H-9) provides the interface for the LPA’s
through the LPAC, punchblock, heat exchanger and alarms to the
C-CCP backplane. The ETIB interface board is contained in a protective
housing which is mounted on the RF cabinet frame.
The ETIB is located internally to the frame as shown in Figure H-1.
Figure H-9: ETIB I/O Connectors and Attaching Cable Numbers
SITE I/O (C-CCP Backplane)
FW00701
P7
RFDS
J6
DC POWER
(Reserved)
J1 To ALARMS OUT
(C-CCP Backplane)
P2
LPAC
P9 ALARMS IN
(From Bulkhead )
RGD/RGPS
P8 OPTIONS
RECEPTACLE
Cable #
3064794A05
Cable #
3086655H02
Cable #
3064534A08
Cable #
3086086H02
Cable #
3086000H02
Cable #
3086433H04
Cable #
3086366H02
J2
J5
LFR/HSO
J3
J4
HEAT EXCH
(See Figure H-16)
See Figure 2-5
and Figure H-3
See Figure 2-5
and Figure H-3
See Figure 2-5
and Figure H-3
Cable #
3086500h01
(See Figure H-8)
(See Figure H-1)
(See Figure H-1)
Cable #
3086168H01
Cable #
3086569h01
DOOR INTRUSION ALARM
H