User's Manual Part 1

ATP Tools and Materials – continued

Jun 2004

1-17

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

DRAFT

S Advantest R3465 Analyzer with R3561L signal generator

CDMA2000 1X and IS–95A/B test capability – The following

communications system analyzers which provide both CDMA2000 1X

and IS–95A/B test capability are supported by the LMF:

S Agilent 8935 series E6380A communications test set (formerly HP

8935) with option 200 or R2K for CDMA2000 1X support

S Agilent E4406A

S Advantest R3267 spectrum analyzer with Advantest R3562 Generator

for IS–95 and cdma200 1X testing

A combination of test equipment supported by the LMF may also be

used during optimization and testing of the RF communications portion

of BTS equipment when the communications system analyzer does not

perform all of the following functions:

S Frequency counter

S Deviation meter

S RF power meter (average and code domain)

S RF signal generator (capable of DSAT/CDMA modulation)

S Audio signal generator

S AC voltmeter (with 600–ohm balanced audio input and high

impedance input mode)

S Noise measurement meter

S C–Message filter

S Spectrum analyzer

S CDMA code domain analyzer

Advantest R3267 with Advantest R3562 Generator are

capable of performing IS–95B and cdma2000 1X tests, if

the required options are installed.

NOTE

GPIB cables

Two Hewlett Packard 10833A or equivalent; 1 or 2 meters long used to

interconnect test equipment and LMF terminal.

Power meter

Gigatronics Model 8541C with 80601A power sensor capable of

measuring from –70 dBm to +23 dBm; supported by the LMF to

perform BTS Total Power measurement.