User's Manual Part 1
Installation Tools and Materials
Jun 2004
1-11
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
DRAFT
Introduction
Many of the tools and materials depend on the style of the wall, pole, or
rack on which the mounting bracket is being installed. The tools and
materials required to install the BTS hardware are specified for each
mounting style. Due to the variability of mounting styles, additional
tools and materials may be required to meet specific site needs.
Tools and Materials for
Installation
The tools and materials listed in Table 1-3 are recommended to properly
and safely perform the installation procedures.
Table 1-3: Recommended Tools and Materials for Rack Mounting
Hand Tools Materials Purpose
Adjustable Torque ratchet and socket
set
Customer Supplied General torquing of screws and nuts.
T10, T20, T30, Security T20,
Security T30 Torx, cross–recess,
flathead bits, 1/4–in. hex
Customer Supplied General purpose use
Torque driver wrench, 1/4–in. hex
female drive, 0–10 N–M
(Utica P/N TCI–150 R/A
3/8–in. or equivalent)
Customer Supplied
General torquing of screws and nuts.
Power Drill, 1/4–in or 3/8–in drive Appropriate wood and
masonry drill bits (Standard
set may be adequate)
Customer Supplied
Drill holes in wood and light concrete
Hammer Drill Appropriate masonry drill
bits (Customer Supplied)
Rack installation to floor and RGPS
to wall
Adjustable Wrench Customer Supplied General purpose use
Mechanical lifting device Customer Supplied For lifting equipment
Bucklestrap Cutting Tool (Motorola P/N
6604809N01)
Pole Mounting
Tape Measure Customer Supplied General purpose measurement
Heavy Gloves Customer Supplied Hand Safety
Safety Glasses Customer Supplied Eye Safety
Tin Snips Customer Supplied General purpose metal cutting
Hacksaw Various blades
(Customer Supplied)
Cutting large coax cable
Metal File Fine cut
(Customer Supplied)
Coax cable preparation
Flashlight Customer Supplied General purpose use
Utility Knife Customer Supplied General purpose cutting
Small Flathead Screwdriver Customer Supplied General purpose use
1