User's Manual Part 1
Thermal Management Enclosure Installation – continued
Jun 2004
4-25
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
DRAFT
Figure 4-17: Wall Mounting Bracket and Pole Mounting Bracket Assembly
ti–cdma–wp–00317–v01–ildoc–ah
Slots for hanging the TME
Isolation Pad
Isolation
Washer
Shoulder
Washer
M6
Screw
Pole
Mounting
Straps
Pole Rest
Wall Mount
Follow the procedure in Table 4-15 to wall mount the TME. Refer to
Figure 4-17 for the Wall Mounting Bracket. Check site documents to
verify that wall structure and supporting hardware are capable of
handling the load created by mounting the BTS system.
Once TME is installed, DO NOT use it as a step ladder. It
will not support a person standing on top or hanging from
it. DO NOT mount HMS and leave it in the open position.
WARNING
4