User's Manual Part 1

Attaching BTS to Mounting Rack – continued

Jun 2004

4-7

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

DRAFT

BTS Mounting Bracket

Perform the procedure in Table 4-2 to attach the bracket to the BTS.

Table 4-2: Procedure to Attach BTS Mounting Bracket

Step Action

1 Atttach mounting bracket as indicated in Figure 4-4.

2 Using two (2) isolation washers and 2 M6 screws securely attach the mounting bracket to the forward

most holes on the BTS. Torque screws to 5 N–M (44 in–lbs).

MOUNTING

BRACKET

ti–cdma–wp–00302–v01–ildoc–ah

2 M6 SCREWS &

2 ISOLATION

WASHERS

Figure 4-4: Attaching Mounting Bracket to BTS

Hole not used.