User's Manual Part 1

Attaching BTS to Mounting Rack

Jun 2004

4-5

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

DRAFT

Objective

The objective of this procedure is to attach the BTS to the Rack.

Background

The mounting plate is attached to the Rack, then a mounting bracket is

attached to the BTS. Finally, the BTS is attached to the Mounting Plate.

Required Tools and Materials

The following tools and materials are required to attach the BTS to the

Mounting Plate.

S Torque driver wrench, 1/4–in. hex female drive, 0–10 N–M

S T30 Star tamper bit

S Three (3) M6X16 screws (Motorola Part No. 0310907D03)

S Three (3) isolation washers (Motorola Part No. 4309874U03)

S Six (6) customer supplied rack screws (Check manufacturer’s

specifications)