User's Manual Part 1

Cable Description – continued
Jun 2004 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU 3-3
DRAFT
Table 3-1: Cable Descriptions and Part Numbers
Cable DescriptionPart NumberQty.
K 1 Customer
Supplied
AC power cable, 10 AWG, copper, designed for 200 – 240 VAC @ 25
A.
L{ 2–7 Customer
Supplied
DC power cables, 8–10 AWG, stranded, designed for +20 to +34 VDC
power input
*Quantity of cables depends upon system configuration. Your system may require one or more Motorola kits.
Refer to Motorola Kits for Multi–Unit Installations for more information
** An SMA to N adapter is required; otherwise, a cable must be made with an SMA connector on one end
{ Length of cables are dependent upon BTS equipment layout.
Cabling for EV–DO
Information regarding EV–DO (MCC–DO) cabling can be found in
1xEV–DO Hardware Installation manual – 68P09257A95
3