User's Manual

Heat Management System – continued
Jun 2004 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU 9-79
DRAFT
Perform the procedure in Table 9-48 to install the HMS Controller.
Table 9-48: Procedure to Install HMS Controller
Step Action
1
2
3
4
5 Perform the procedure in Table 9-44 to install the HMS.
Figure 9-30: HMS Controller
ti–cdma–wp–00263–v01–ildoc–ah
Blower Fan Replacement
Procedure
This information is still under consideration at this time. Updated
information will be supplied at a later date.
If desired, record the TME, HMS, and Blower Fan serial number of the
failed unit in Table 9-72 at the end of this chapter.
Perform the procedure in Table 9-47 to remove the Blower Fan.
9