User's Manual

Multiple Compact BTS Configuration (Outdoor) – continued

Jun 2004 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU E-23

DRAFT

S Directional coupler and combiner are not environmentally protected ,

and so must be placed within the TME.

ExpansionCompact BTS

Installation Procedure

Follow the procedure in Table E-16for installation of multiple Compact

BTSes.

Table E-16: Procedure for Installing Expansion Compact BTSes

Step Action

1 Follow the procedure in Chapter 4 for installing a Compact BTS in a rack.

2 For a 3 BTS expansion configuration, follow Figure E-1. Proceed to step 3.

2a For a 2 BTS expansion configuration, follow Figure E-2. Proceed to step 3.

2b For a 1 BTS expansion configuration, follow Figure E-3. Proceed to step 3.

3 If conduit is not used, dress cables as necessary.

4 Perform Optimization and ATP as described in Chapter 6. LMF Help provides further information.

Frame ID Switch Settings

Refer to Chapter 5, Figure 5-1 or Figure 5-2 or Table 5-1 through

Table 5-4 for the Frame DIP Switch settings.