User's Manual

Recovery From BTS Router Boot to rommon

68P09258A31–A

Oct 2003

1X SCt 4812T BTS Optimization/ATP

J-68

Table J-15: Simple Recovery from BTS Router rommon Boot

Step Action

* IMPORTANT

This procedure does not cover all aspects of BTS router operation and programming. Before performing this

procedure, review BTS router initialization, operation, and programming information and procedures in

MWR1941 Wireless Mobile Edge Router Software Configuration Guide; part number 78–13983–01. Have this

publication available for reference while performing this procedure.

1 This procedure assumes the LMF computer is set up and connected to the BTS router with an active

HyperTerminal communication session. If it is not, follow the procedure in Table J-2 to establish a

HyperTerminal communication session.

2 With the rommon 1 > prompt displayed in the HyperTerminal window, enter the following to identify

the IOS file on the CF memory card:

dir slot0:

A response similar to the following will be displayed:

rommon 1 > dir slot0:

program load complete, entry point: 0x80008000, size: 0xb2a0

Directory of slot0:

2 2212 –rw– canned–config

3 7051976 –rw– mwr1941–i–mz.122–8.MC2a.bin

rommon 2 >

. . . continued on next page