User's Manual

Replacing Installed BTS Router CF Memory Card IOS Version68P09258A31–A

Oct 2003

1X SCt 4812T BTS Optimization/ATP

J-55

Table J-12: Use CF Memory Card Reader to Place IOS File

First in CF Memory Card File Sequence

Step Action

31 If this procedure was entered from step 20 of Table J-11, return to Table J-11, step 21.

32 If no other BTS router file operations or configuration actions are required, perform the following:

32a – Remove power from the router and disconnect it from the power supply.

32b – Disconnect all cabling from the BTS router.

32c – On the LMF computer, exit the HyperTerminal communications session.

If a tftp server was used in this procedure and no additional tftp transfer activities will be performed,

change the NIC IP address and subnet mask back to those for LMF–BTS communication recorded in

Table J-4, step 9b.

CAUTION

If the BTS 10base–2 LAN IP address and subnet mask for the LMF computer’s NIC are not restored,

the LMF can not log into a BTS when attempting to perform a BTS optimization or ATP.