User's Manual

Verifying IOS Canned Version of the CF Memory Card
68P09258A31–A
Oct 2003
1X SCt 4812T BTS Optimization/ATP
J-30
using a HyperTerminal connection. Attempting to format a CF memory
card from a Windows–based computer using a card reader could result in
unpredictable BTS router operation.
CAUTION
Do not format BTS router CF memory cards using a
Windows–based computer. Only format CF memory cards in a
BTS router.
Verifying IOS Version and Loading BTS Router Canned
Configuration File to CF Memory Card Using a CF
Memory Card Reader
The process of transferring a canned configuration file to a BTS router
using a CF memory card reader consists of the following activities:
1. Transfer the canned configuration file to the router’s CF memory
card using a CF memory card reader
2. Copy the file from the CF memory card to the router’s
startup–config file
The following procedures are used to accomplish these actions.
Prerequisites
The following is required prior to performing this procedure:
S A copy of the required MWR 1941 router IOS version file is installed
in the default tftp directory (transfer the file to the LMF computer
using FTP, internet download, or media such as a Zip disk; file size is
approximately 7–8 MB)
Verifying IOS version and transferring canned
configuration file to the router’s CF memory card
NOTE
IMPORTANT: MWR 1941 routers must be loaded with IOS
version mwr1900–i–mz.122–8.MC2d.bin or later. This router
model will not function properly with earlier IOS versions.
Transfer canned configuration files from the LMF computer to a BTS
router CF memory card by following the procedure in Table J-8.
Table J-8: Transfer Canned Configuration File to CF Memory Card with CF Memory Card Reader
Step Action
* IMPORTANT
This procedure does not cover all aspects of BTS router operation and programming. Before performing this
procedure, review BTS router initialization, operation, and programming information and procedures in
MWR1941 Wireless Mobile Edge Router Software Configuration Guide; part number 78–13983–01. Have this
publication available for reference while performing this procedure.
1 If it has not been done, install a CF memory card loaded with the IOS in the BTS router by following the
procedure in the 1X SC 4812T BTS FRU Guide .
* IMPORTANT
MWR 1941 routers must be loaded with IOS version mwr1900–i–mz.122–8.MC2d.bin or later. This
router model will not function properly with earlier IOS versions.
. . . continued on next page
J